Win10 System SMT Assembly Machine SUNMENTA Automatic Scraper Inspection Equipment
Contact Person : Shelly Xu
Phone Number : 86 13316012003
WhatsApp : +8613316012003
|Product Name:||Seamark||Usage:||Smt Machine,pcb Assembly Line|
|Quality:||100% Tested, Top Quality||Lead Time:||30 Days|
ZM-R7220A Infrared Soldering Station,
5300W Infrared SMD Rework Station,
Seamark Infrared SMD Rework Station
●Suitable for rework of packaged components such as BGA/POP/CSP/LED/QFN/CSP/LGA/Micro SMD/MLF (Micro Lead Frames)
Independent three temperature zone temperature control system:
1. The upper and lower temperature areas are heated by hot air, and the IR preheating area is heated by infrared, and the temperature is accurately controlled at ±3°C. The upper and lower heaters can be heated from the top of the components and the bottom of the PCB at the same time, and multi-stage temperature control can be set at the same time; IR The preheating zone can adjust the heating area according to the actual requirements, so that the PCB board can be heated evenly. The maximum temperature of the upper and lower temperature zones can reach 450℃, and the maximum temperature of the IR preheating zone can reach 300℃.
2. The BGA chip and the PCB board can be heated locally with hot air at the same time, and supplemented by a large-area infrared heater to preheat the bottom of the PCB board, which can completely avoid the deformation of the PCB board during the repair process, and the support bar or thimble The effect is better; by choosing the upper temperature zone or the lower temperature zone, the upper and lower temperature zones can be used alone, and the energy of the upper and lower heating bodies can be freely combined.
3. High-precision K-type thermocouple closed-loop control and PID parameter self-tuning system are selected; it can display seven temperature curves and store multiple sets of user data at the same time, and has the function of instantaneous curve analysis; the external temperature measurement interface realizes precise temperature detection, The temperature curve of the actual BGA collected can be analyzed and calibrated at any time.
Precise optical alignment system:
The image of the optical alignment system of this machine is clear, the maximum can be enlarged to 200 times of the components, and the placement accuracy can reach ±0.01mm. And it has the functions of splitting two colors, zooming in, zooming out and fine-tuning, and is equipped with a 15″ high-definition LCD display. Switch to "Place" mode, which can realize the function of automatic alignment and placement.
Superior safety protection function:
This machine has passed CE certification and is equipped with emergency stop switch and automatic power-off protection device for abnormal accidents; after welding or desoldering, it has an alarm function. When the temperature is out of control, the circuit can automatically power off, and it has double over-temperature protection functions. The parameters are protected by password to prevent arbitrary modification and other safety protection and fool-proof functions. It has superior safety protection function to ensure that the PCB and components are not damaged and the machine itself is damaged under any abnormal conditions.
During operation, each heater is automatically monitored in real time. When an abnormal accident occurs, the relevant sensor will send the fault signal to the PLC, and the PLC will automatically close the relevant output channel and display the fault status on the touch screen.
|Power||AC 220V±10％ 50/60 Hz|
|Total power||Max 5300W|
|Heater power||Upper temperature zone 1200 W, lower temperature zone 1200 W, IR temperature zone 2700 W|
|Temperature control||Independent heating control system V2 (with software copyright) independent temperature control up and down, the temperature accuracy range is ±3℃|
|PCB fixing method||V-shaped card slot + universal clamp + laser red dot positioning|
|Optical alignment accuracy||±0.01mm|
|PCB size||Max 410×370 mm Min 6×6 mm|
|Preheat zone size||Max 280×380mm|
|Applicable BGA size||Max60×60mm Min 2×2 mm|
|Temperature measurement interface||1 pc|
|Machine size||L640×W630×H900 mm|
|Main material||Panasonic PLC + Panasonic CCD optical alignment system + Korea Shilin (CNB) industrial camera + American imported Omega temperature measurement system + German heating core + Taiwan imported heating brick + Dalian Institute of Technology temperature control module + Taiwan high-precision suction rod System + Japan Zuo Teng vacuum pump + Taiwan Shangyin precision ball guide, etc.|
Q: What we can do for you?
A: Total SMT Machines and Solution, professional Technical Support and Service.
Q:Are you a trade company or a manufacturer?
A: OEM & ODM service are available.
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
Q: What is your payment terms?
A: 30% deposit in advance and 70% balance before shipment.
Q: What your main customers?
Q: Why choose us?
A: Leading SMT Supplier in China; Trade assurance to USD 560,000+; Professional after-sales service team.
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT
Enter Your Message