1.Used in the beginning of SMT line,send out the PCBs from magazine one by one after received the signal from downstream.
2.One special magazine can be placed. The staff will put the magazines of the installed PCB board into the track from the front and bottom of the machine. The magazines will enter the lifting platform, and the machine will put the PCB board into the magazine one by one. After the magazine is full, it flows out from the upper part of the front of the machine and is taken out by the operator.
3.The magazine size is (248 * 85.5 * 144MM) and each layer is 5.75mm
Magazine Size:(248*8505*144mm，Height of each layer is 5.75mm can holde 20 layers)
Transport direction:Front rail fixed,from left to right transfering.
Lifting distance selection:01、02、03、04